Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

nima314 · 04-17-2016, 02:03 AM

@TylerLieberman

All right, a big thanks for the quick replies. This is certainly much more satisfying than reading other people's builds and discussions, as everyone has a specific set up at the end of the day. I could get coilovers if they are not height adjustable, but I could not find any. Have you ever come across one?

About the clearance, that all makes sense now, thanks for clearing that up for me. I'll go with the +38 rims and put 20mm spacers in the front, giving it a +18, which would be flush as yours pokes by 2-3mm. However, as the tyre is smaller by 10, maybe a 25mm spacer will do the job. I might have to wait and measure it all up. I'll stick to the rear having no spacers, and if it looks like it could poke out a little more due to my tyre being 255 rather than 265, I'll just pop a 5mm spacer in there!

04-17-2016, 02:03 AM	#151
nima314 Senior Member Join Date: Mar 2016 Drives: Subaru BRZ 2017 (almost) Location: Victoria, Australia Posts: 101 Thanks: 51 Thanked 18 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	@TylerLieberman All right, a big thanks for the quick replies. This is certainly much more satisfying than reading other people's builds and discussions, as everyone has a specific set up at the end of the day. I could get coilovers if they are not height adjustable, but I could not find any. Have you ever come across one? About the clearance, that all makes sense now, thanks for clearing that up for me. I'll go with the +38 rims and put 20mm spacers in the front, giving it a +18, which would be flush as yours pokes by 2-3mm. However, as the tyre is smaller by 10, maybe a 25mm spacer will do the job. I might have to wait and measure it all up. I'll stick to the rear having no spacers, and if it looks like it could poke out a little more due to my tyre being 255 rather than 265, I'll just pop a 5mm spacer in there!