Quote:
Originally Posted by CSG Mike
When you first receive your Solo DL, follow these steps:
- Install the Race Studio Software
- Plug in your AIM Solo DL to your computer, and turn it on
- Open RaceStudio
- Click Device Configuration
- Select ECU Manufacturer to be Toyota
- ECU Model should be set to GT86/Scion_FRS
- Set sampling frequency to maximum for all channels
- Change measurement unit to the unit of your choice.
|
I'm setting new profiles for my FR-S and S2000 (based on sstfnv's previous post).
You are suggesting setting all of the ECU channels at 100Hz instead of the default 10Hz? If so, have you encountered any space/capacity issues with the 16 mb internal memory at the max sample rate?