|
I have LEDs run off the map light circuit, it is a PWM circuit, so the fade effect is maintained with LEDs. I also have LEDs in my wheel wells that are running signal from the map light using a SSR. My advise here is be carful with your current draw on that circuit. I would start by removing the OEM halogen and replacing that with an LED. This circuit is connected to the BCU, so if you mess up it will be expensive to fix.
that said I probably have some odd 50 or more LEDs between footwells, map light itself, all 4 wheels, and the front grill has a strip too, all running off that circuit with a SSR driving most of them.
|