|
Yesterday I pulled the factory radio out to find a rattle behind the dash. Turned out it wasn't the radio but rather the center vent assembly. The plastic vent was barely making contact with the dash board and would rattle while driving. A small piece of foam insulation fixed it. I also plugged up the hole in the rear fender wells behind the rear seat. Used peel & seal and sealed up the entire area. Car's much quieter now.
I took some detailed pictures of the rear speakers with measurements for when I eventually make custom fiberflass enclosures to replace the rear speakers. I'm going to run an active 4-way system with stereo mid-bass subs in the rear speaker location and a mix of linear and minimum phase EQ with linear phase crossovers. Will post a new thread when this project starts.
|