Quote:
Originally Posted by acetothermus
I've been noticing a worrying trend of people riding right up on my rear end when I'm stopping. I've been employing my own version of this...I just push and release the brake pedal a few times when I see someone obviously not slowing down. This might be a better solution.
Do you do any cutting of the wire harness?
|
Yes, although I wouldn't call it a harness.
You must clip a single wire. Take a look at this link
http://www.kahtec.com/install_smart_stop.htm . You'll find the instructions here.
I did not have to clip the OEM wires. Since I removed the OEM 3rd brake light, I just took the connector off that, and soldered the Kahtec module to that connector.