[FRSBRZGT86FAN]

Originally Posted by ToySub1946

"Thinking it might be axle.

Anyone have a guide to replace them/tips/plan of attack?"


Best to check with others in the suspension section of this forum... if axle needs replacement. Not sure, me, what minimal parts of rear suspension need to come off to get outer end of an axle out. Surely most anyone would need at least a 1/2" air impact wrench with proper socket to easily get the axle nut off end of axle. The inner cv joint would surely just pop out of diff with a pry bar. It's typically held in with an exterior snap ring.
Inner cv joint may be available separately, as a part, rather than purchasing entire axle assembly ??

Pics of rear end suspension >within< this older online section of Edmunds:

http://www.edmunds.com/car-reviews/t...alkaround.html

Thats exactly how it's removed it literally can be pryed off and on the rear diff

Originally Posted by Rifle

Turns out it was the axle. Driver side. Just picked up a new one from @Pure Automotive and will be putting it back on shortly!

Thanks to everyone who helped!

You should replace both with DS ones so its safe up to 600 hp