|
Oh I discovered the Toyota wire harness repair manual tonight. I'm going to get it added to the sticky section of the DIY area. Best part is it gives the factory part number to all the housings which each parts guy I talked to seemed clueless to figure out on there own.
So here are the OEM part numbers for the 10 Series/BRZ headlights 8 pin connector.
90980-10896 (male terminal housing)
90980-10987 (female terminal housing)
Connector tab sizes are 2.3 II (in mm). IT list the part number of the leads with a short section of wire already crimped so I'm not bothering with listing those part numbers.
Sealing plug
6mm diameter 90980-09152
5mm diameter 90980-09229
|