The parts collection grows.
I'll be taking the car to a shop soon to have all the Whiteline parts installed. I'll also let the shop install the ARP extended wheel studs, Muteki open lugs and have them press out the studs of my bolt-on spacers to convert them to slip-on for easy wheel swaps from track to street. The brake caliper press should make pad swaps just as easy. Due to the special tools needed and inevitable frustrations and an alignment being required I'll let the pros handle this job for once.
Apparently the Maxxis VR-1 releases on their website on March 28th so I'll try to order 255/40/17 then and get them mounted and balanced at the same time the suspension work is done so I can get it aligned immediately after.
Stay tuned.