Quote:
Originally Posted by Amir Ghadiri
Looks good!
If you're willing to consider my advice, don't use this oil pressure port for your feed (left). Cap it off.
Attachment 131433
Instead, use this pressure port as your feed (front left of motor).
Attachment 131434
Once you have the motor installed in the car, you will find the clearance between pan and steering rack is inadequate to fit a proper -10 oil fitting for your oil feed. There is however (barely) enough room to fit the return fitting.
Best of luck to you, this build looks promising. |
That helps a bunch. Thank you @
Amir Ghadiri
Sent from my iPhone using Tapatalk