Quote:
Originally Posted by Owentdc
Steve,
Got the first problem when i first connected the device to the car and it was in read mode, reading and copying the ecu.
Mode file not found. Cannot create a tuning file.
When I tried to connect my device to the computer, I got the second error in the open flash manager.
Unconfigured device. It cannot be used.
Any thoughts?
|
Mode file not found. Cannot create a tuning file.
This is not a big problem just means the pre loaded oft tune database does not support your ROM calibration id, you just need to manually download tunes from the openflash downloads page and upload appropriate tune files with matching calid to oft with openflash manager software.
Unconfigured device. It cannot be used.
That message does not look good, did the oft read complete ok ?
If you connect tablet to car is the read icon now greyed out ?
Are you using correct openflash manager software ?
Its the first link on downloads page
http://www.openflashtablet.com/downloads/
OpenFlash Manager (v1.25.1) UPDATED 2/18/16 This application is used to upload, download new files to your OpenFlash Tablet. It is also used for updating templates files, downloading data log files and for erasing data.
don't use the Flash tablet manager software its for Ducati bikes only.
you might also need the latest template file
http://www.ft86club.com/forums/showp...79&postcount=2
else call the openflash guy on phone they should be able to sort it out