Quote:
Originally Posted by Racecomp Engineering
Haha spacebattles.
|
Ugg I hate typing on my phone.... Hopefully my new S7 arriving this week is better.
Quote:
Originally Posted by strat61caster
6" spring with a helper looks like the way to go unless you're keeping things soft.
|
My goal is actuallyto keep things soft up front. I thibk my solution will probably be some non-lowering camber plates but thats proving to be difficult to find the right ones...
Quote:
|
Once I solve the clunking I've got in my rear I'll post the drawing for the adapter I had fabbed up so I didn't have to buy rear top hats, it's a very simplistic part but because it's basically a >4" aluminum donut (matl cost at least $40/pair unless you go plastic or can buy in bulk) I would be surprised if anyone could get it made for less than $100/pair unless a company steals the plans and makes a batch of them for sale. Not sure if the clunking is something loose or if it can be solved with a piece of rubber to take up the gap in my adapters (which is what Toyobaru did).
|
I haven't had my spring noise since I posted about it *knock on wood* bit it was only happening once per drive and was difficult to replicate. It may have solved itself.