View Single Post
Old 02-20-2016, 10:18 AM   #9
zkahle
Senior Member
 
zkahle's Avatar
 
Join Date: May 2013
Drives: 2013 Scion FRS Asphalt
Location: San Antonio
Posts: 158
Thanks: 46
Thanked 33 Times in 20 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Garage
Quote:
Originally Posted by swarb View Post
Jack the car up. Try to rotate the front wheel and see if the brake pad/caliper is dragging. If not, pull the wheel to see if the inside of the wheel/tire is damaged from rubbing.
Also what is you alignment settings? Camber settings? Camber bolts?
Are you lowered? Which springs?
Wheel offset?
Thanks for the input, I'll put the car on a jack later. My wheels are 18x9.5 +38 ambit re08.2s the springs are Eibach sportline. I have yet to get a alignment, camber is fine but the toe is a little out of both of the front tires, I have no camber bolts or plates. I have periodically checked for rubbing on the inter part of the rim and tire for the front tires as there is only 3mm of clearence between the wheel and the spring assembly, but to date there is no rubing what so ever.
__________________
Hook Em'
zkahle is offline   Reply With Quote