Quote:
Originally Posted by olsonpg
Was expecting a 221 whp record breaking youtube video.
|
Quote:
Originally Posted by MisterSheep
I was expecting the same. Just don't give him any ideas!
|
Quote:
Originally Posted by ajc209
I had the Moroso baffle installed for a little while. I found at anything above about 6.5k rpms I got oil pressure drop/surge. Presumably because oil wasn't getting back to the pickup fast enough.
They are apparently re-designing it.
A proper trap door design like this looks like it would work better and the Cosworth imprezza baffles look similar.
|
Considering we have 5qts of oil in that little pan I do not think there is a point to baffle below the edge of the pan, I will opt for a much simpler setup