Quote:
Originally Posted by Teseo
I went to my local autobody shop for a fog lights installation estimate, and im worried because he said, need to remove the front bumper to get it. Im afraid when he install back the bumper can be misaligned. Thoughts?
|
There is no need to remove the front bumper. Removing the outer corners of the lower tray (a 10mm bolt and 3 push pin locking style tabs on each side) will give you all the access you need.
To makes it a little easier you can also remove the three locking push pins in each side of the fender and remove the front turn signal indicators (2 10mm nuts) and it'll make it even easier to do.
I found the hardest part was dealing with the confines of the grounding straps for the OEM kit and getting the plug for the OEM harness install out.
Other than that, its a cake walk.