Quote:
Originally Posted by ajc209
Fensport are indeed local - I've had many a lengthy talks with Adrian (owner) over the years. I bought my Cosworth kit from them.
I use an ODB bluetooth and nexus 7 to readout oil temp. I just have the pressure gauge fitted in the drivers side vent to keep and eye open for oil surge/starvation.
At the moment I have mocal spacer and thermostatic plate, but plan to swap over to a mishimoto as it has the sensor 1/8npt thread.
|
Ok. Nexus 7 is a nice setup. I am running P3 Cars A/c vent gauge which handles pretty much everything but is a pain to scroll through on the move, and definitely no good for track, and Block8Head dual pod in the defrost vent for dedicated Defi racer oil temp and pressure. ( I was running boost and oil pressure, but will throw the boost gauge into the Legacy instead in favour of oil temp). I was thinking about the Mishimoto as well but wasn't sure about clearance without running feed lines to the sensors, which was the problem i discovered with my one piece setup, hence the purchase of the TRD plate which should allow me to position both sensors either under the oil lines to the cooler or to the rear, instead of the side