Quote:
Originally Posted by ajc209
Yeah this is exactly the reason I made mine fit behind the fog lights.
I'm interesting in the Velox bonnet vents too, but in the UK rainy weather I worry about water ingress.
P.s. good to see people using bonnet instead of hood  |
Yes bonnet, guard and boot here although I do slip into the 'new' language every now and then. Australia's figurehead is still Her Majesty, Queen Elizabeth II , and in my case helped along by the fact that my mother was English and my father was a Scot.
I have the APR/Carbign Craft alternator and A/C cover trimmed down to clear the supercharger so my belts are covered and the APR carbon cooling plate fitted as well, so I hope that the rain guards will dump over the cooling plate. I also try not to take the BRZ out if its raining. Truth be told I also try not to take my STi Legacy out in the rain either and use any excuse to take my partners Forester instead. Sucks when she is at work.
I remember you mentioned that you were running your oil pressure sensor off a tee along with the stock pressure switch, which is the same as I have been, and that you were planning on using the Mocal spacer with your Mishimoto thermostat sandwich. I have just ordered the TRD sensor sandwich so I can run both my oil temp and pressure off that and it looks to be the same size as the Mocal spacer. Also looks like a good fit with a Mocal thermostat. Looks like Fensport who are local to you have a similar product .....
http://www.fensport.co.uk/Parts/Mode...tegory_16/4696