[go_a_way1]

Originally Posted by Summerwolf

I don't see how you would effectively mount a 10 lb + bottle with a blow down tube there. The only "logical" place would be the spare wheel well to me. You have to drill a hole through the body for the blow down, and with the wiring for the heater and everything you want some space around the bottle. Plus the wiring and lines and everything are not attractive per se. Wow why did I not think of this hahaha! I was worried about where to drill holes but thats perfect!! Thanks!


The purge, you ideally want it where YOU can see it so you know you have a good purge, out the cowl or out the side vent would be ideal...just in the engine bay, probably not. Yeah I was thinking that I should provably be able to see it. If I purged it too long would liquid NO2 spill out? I like the side vent area but if someone walks by or is beside me I dont want to freeze them lol


The stress / cost comment.... I'm not sure. You can have a stress related failure no matter what. You just have to make sure you're doing it as safe as possible. A 50 shot really isn't that much though, lol. Yeah this is something I will just have to take a risk on, like any other FI

Originally Posted by wbradley

You will need to tub out the car and put on Mickey Thompson tires on 12" W wheels to hook up. Sounds like a plan if you want to start drag racing, which these cars were not designed for.

So, no.
LOL I am not going to be drag racing. on the highway this car could use a little more power but around town its perfect for me. Only time I would fire it is when I am going 100kph already and need that little extra push

Reply's in red