Quote:
Originally Posted by zeal86
Hope this helps...
|
Only a bit, was more interested in the spring/top hat cup interface, you've got pics of the top of the mounts, but not the bottom. It seems like the spring is located via a 60/65mm ID lip but I don't want to make a $300 gamble on that.
Totally see what happened to you though, the specs for damper shaft diameter are not published on any site that sells the Beatrush that I've seen (or I'm blind), seems like they're meant for OE or OE replacements and many damper manufacturers use a standard size across their lineup that may not match with OE.
Which agrees with your measurements, that spacer/bushing should fit an M10 thread which includes OE, Ohlins, Bilstein, KW, Koni, etc. but not brands like Fortune Auto, MCS, and RSR (which you're measuring just under 12 so I assume it's M12 like the others).
And if that bushing is threaded or there's a special nut that comes with it the thread pitch could also reduce the compatibility by a lot.
