|
Got my Fogs (both kits) delivered today. I'll get photos for you all another time but here is the quick run down comparing the two (OEM vs. the Bi-xenon housings).
1. The OEM are much larger in diameter than the bi-xenon housing.
2. The horse shoe collar that goes around the OEM fogs to allow them to snap in isn't going to be required with the adapater for the bi-xenons (It won't fit).
3. Not happy to see the connector housings for the shutter mechanism aren't marked for positive or ground to know what side needs to be tapped for what. Hoping it won't matter and it'll just work.
That's it for now. I'm going to get the OEM kit installed first and then move onto changing over to the bi-xenons.
Last edited by NahumCC; 03-10-2016 at 02:14 AM.
|