[GsxrMe]

Hey guys I can't get rid of an oil leak after checking all connections. The leak is at the oil pan and drain fitting. I've dropped the turbo headers and oil pan twice now and to be honest i'm not dropping it a third time.

I'm planning on installing a new, completely different AN fitting but i'm not sure what the thread on the Full Blown oil pans return is.

If you guys have any suggestions or ideas I'm completely open. I rather not replace. The oil leak is super tiny but it does dip time to time on the headers and makes a tiny poof of smoke.

Again the leak is from the return fitting and the oil pan. The picture below is the pan and the fitting i'm talking about is at the very top of the picture.