Quote:
Originally Posted by mmmcambelsoup
Running stock fenders with 18x9.5 et 38 setup 265/35/18 (meaty) sitting pretty flush and aggressive coilover drop. Any ideas how big of a spacer to run to keep the same type of fitment with tokodori fenders? Is this a slap on 15mm spacer type deal, or am I looking at af 30mm spacer? Thanks in advance to those running these fenders already.
@ JordanWho @ TylerLieberman |
^^
18x9.5 +40 Volk TE37SL
265/35R18 Dunlop DZ102 all around
-2.3 / -1.6 camber (f/r)
7,7,5,5mm Parts Shop Max Spacers (24mm total) front
3mm Part Shop Max Spacers rear
Final wheel spec: 18x9.5 +16 (front) / 18x9.5 +37 (rear)
Car rubbed a little bit all around under hard cornering. Also was damn near impossible to run the corner lights at this height with this wheel setup. If I did it again, I'd get LCAs up front to widen the track and go up to about -3 camber. More inward clearance, and I would be able to ditch the spacers.
Another pic to show how dead on the fitment was up front.
