Quote:
Originally Posted by VitViper
|
Well from looking at the graph if you were to shift at redline 7400, you'd be at 14 PSI. But if you shift at 7000 you'd be at 11.5 PSI, that sounds a lot safer especially on 93 and E85.
And I'm sure since there's not much low end TQ the stock engine should be able to run it reliably.
Edit: So I messaged VitViper about why is boost irrelevant, because I didn't wanna look too much like a dumbass in front of all you guys and this is what he said. I also asked him how much he was making to the wheels. So I thought I'd share this to everyone that's interested in this thread.
"Boost is irrelevant because boost level doesn't break anything (aside from blowing poorly secured couplers off). Power (tq) breaks stuff. The power levels these S/C kits put out won't break anything, even at 14psi.
http://blog.vittuned.com/jackson-rac...ft-86-fr-sbrz/ "