Wasn't sure about the fit when I ordered the wheels. Was deciding between the +35 & +45 offsets this wheel is offered in. Could not find any info on fitment for this size, so I just took a guess and got lucky. There's lots of room for more rubber on the inside. I measured 3/4" between the outside edge of the inner wheel lip and the extra wide stock spring perch up front, Theres much more room out back. The fender lips are nicely tapered up top for clearance. The more familiar I get with the car, the more obvious it is that higher HP FI setups are not an afterthought in the design. 5mm spacers may be doable, but another +10mm of offset may cause some rub depending on tire size, ride height and camber.
