01-04-2016, 08:15 AM
|
#59
|
|
Senior Member
Join Date: Jan 2015
Drives: GT86
Location: UK
Posts: 305
Thanks: 246
Thanked 195 Times in 81 Posts
Mentioned: 2 Post(s)
Tagged: 1 Thread(s)
|
Quote:
Originally Posted by killboy
FWIW we have almost this exact same setup on our BRZ...AVO stage 3, billet wheel, race intercooler, forged internals, lower compression pistons, upgraded fuel injectors/pump, 93 octane. (no E85 around here)
Your original post asked about max boost and where it comes on, so to answer, ours is set to 14.9lbs and gets there at about 3300rpm, tapers a couple of psi near 6000 on. We make about 380whp on this one. We don't have upgraded springs though, (should have done that while in there but forgot) and I forget the CR of the pistons...try to get back with you on that. We have a built, supercharged FRS also and I get them confused.
|
Thanks for the info, that's nice to know how someone else is getting on with a very similar setup. I'd be interested to know what CR you're actually running if you could find out.
__________________
My GT86 build so far:
AVO Stage 4 Turbo, Carrillo forged con rods, 10:1 CR Carrillo pistons, AVO 3 inch turbo back exhaust, Helix clutch, TheDriveShaftShop drive shafts, lightweight flywheel, NamelessPerformance hydraulic hand brake, KW V3 coilovers... and lots of other little bits
|
|
|