Quote:
Originally Posted by bren5279
Just made the same mistake.
3 notes for a faster installation:
1. MAKE SURE THAT PLATE IS LINED UP
2. the interior does NOT need to even be touched. You can pull the rubber cover over the linkage and remove the pin from under the car
3. if you're careful you do not need to unplug the starter connections, just move it out of the way
4. the lower panel can be taken apart as one piece if you leave the 4 small screw bolts between the two together.
|
How do you like up the plate?
Sent from my LG-D850 using Tapatalk