Quote:
Originally Posted by Plaid Man
Modify stock how? Just cut and put adjusters in? I am looking at the same thing now as I have a problem with my MCS dampers. The shock body sticks so far down that at high steering angles the bottom of the shock hits the FSB endlink ball joint housing at the bottom. This is using a TRD FSB and stock end links. I am looking for ways to fix this. I am looking for different end links, that are either lower profile or longer so I can get them lower than the damper. Also wondering if the TRD FSB that I bought from an Ebay store is a knock off. Any suggestions?
|
Oh, well, my Strano (and, earlier, Whiteline) FSBs are both a little different than OE and require shorter endlinks. There's a thread or 2 about it - basically just cut a section out and reweld it.
I'm assuming the TRD bar is OE style and is supposed to work with the stock endlinks? I had a hell of a time getting my bars quieted (
http://www.ft86club.com/forums/showp...7&postcount=28 ) The Whiteline links are pretty bulky, so I'd recommend against them.