This pull is not a good candidate for conversion either. Do you have bouncy suspension or this is a rough road?
http://datazap.me/u/makinenkr/201512...84-81-79-80-78
@
makinen This is a 3rd gear pull I did at a slight downhill grade.
http://datazap.me/u/solidone/cw1z2-1...5012&mark=4887
Notice there are no dips or spikes in the RPM. good candidate for conversion if I had done it on a level surface.
1smoothing coverted from this log
2 smoothing with same log:
While the curvature of the line reflects the actual output the line is shifted up by about 20~25 WHP at the peak from what I'd get on a level surface.