|
so, that appears as if it is made to connect to the front.
it might work on the rear as well, but the rears harness is wired .. special.. theres a really good thread on how to use the rear amp harness.
a good note for what that's going to do is that it appears like that's going to give you full signal out, which if you feed to a sub amp, you will need to be sure to use the amps onboard crossover. Not precisely a problem, just noting it.
I think most people do this by wiring a line out converter to the rear amps wiring harness, however I believe it could also be done with what you have there from the front.
|