|
Completely possible. Took me ~2 hours the first time, now its about an hour tops.
Undo the O2 sensor wiring from the top, jack up the car, drop the metal skid plate (10 & 12mm bolts), 3 nuts on each side holding the header to the block, 2 nuts holding it to the overpipe.
To get the header off the car (due to stud clearance), you will need to undo the exhaust hanger holding the front pipe to the car. Its two bolts holding the bracket to the body.
Install is easier as there are no studs, just nuts and bolts so its slips on much easier.
|