View Single Post
Old 12-12-2015, 08:16 PM   #15
jflogerzi
Senior Member
 
jflogerzi's Avatar
 
Join Date: May 2012
Drives: 2013 Series 10 6MT FR-S
Location: Moreno Valley, CA
Posts: 5,565
Thanks: 2,013
Thanked 2,043 Times in 1,474 Posts
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Garage
Quote:
Originally Posted by Rampage View Post
Cheaper is debatable if you do the turbo right. Reliability is no comparison. The 2ZZ running on a stock 2000 Celica ECU will be factory dependable and problem free.

It is also a myth that the MR-S is hard to work on. In fact, it is one of the easiest cars I have ever worked on. You just have to approach things slightly different. For example, the engine comes out the bottom instead of the top. The only thing difficult at all is doing something on the intake side of the engine.

@OP. If you get serious about the MR2 Spyder then you should stop by Spyderchat.com and check out the buying guide (things to look for when buying). Make sure that you check to see that the pre-cats located in the exhaust manifold are intact. You can check them by pulling the two O2 sensors in the manifold and looking through the holes. Also check for oil consumption. The early 1ZZs are notorious for using oil and when you do not check the oil often enough......poof.

For $7500 you might be able to find a 2ZZ swapped car. They do not have the oil issue and they come with 50 or so extra HP when using the Celica ECU. The only issue you might have is if you live in Ca where passing the visual part of the emissions testing is a bit of an issue.
Thanks. I really think at this point it's between mr2 or bmw z3. I am not going to rush into this.

Sent from my LG-D851 using Tapatalk
__________________
2013 Series 10 FRS #553
RCE T2's, SPC LCAs -4/2.6 camber
JDL 4-2-1 EL, FP and OP, Tuned by Zach@CSG on e85
RR Wilwood Front/Rear Sport BBK, Motul 600 Fluid
ARC-8 17x9 SX2 GTs 245s/Koing 17x8 v730's 225's
jflogerzi is offline   Reply With Quote