[go_a_way1]

Originally Posted by soulreapersteve

Hello!

Quick question regarding using a 12 volt adapter/splitter to power 2 devices. I bought a dash cam and have a radar detector (Escort Redline) that is currently using the glove box power outlet. The outlet located in the center console is powering the GPS. IIRC, the outlets provide 12v.

Essentially, I'm going for the "stealth" install of both dashcam and RD. Am I able to use the adapter to power both devices without causing any fuses to blow? Listed below are adapter/splitter, smartcord, and cam. It appears the dashcam uses 5v and the RD uses 12v cord - but the spec sheet doesn't list how much it actually uses.


https://www.escortradar.com/store/Du...t-Adapter.html

https://www.escortradar.com/store/Co...tCord-Red.html

https://www.escortradar.com/pdf/RedLineManual.pdf

https://dashcamtalk.com/forum/thread...quality.15505/

Amazon.com : Street Guardian SG9665GC Supercapacitor Sony Exmor IMX322 WDR CMOS Sensor DashCam 1080P 30FPS + 32GB microSD card + USB/OTG Android Card Reader + GPS (Best Of - DashCamTalk) : Electronics

Thanks for any help that is provided!

You mean the one in the glove box right??? And you should be fine using those at the same time