Some help necessary here. Setup:
Open Flash OFT300 package
Vortech supercharger (standard pulley)
Open Flash Header
Stock catback
Vortech Maxflow BOV
Logs:
http://datazap.me/u/sirsol66hotmailc...data=1-2-10-11
Car is showing very very high fuel trims (25+) at idle and low RPM areas. Car is running completely fine but the trims are not settling. No knock at WOT pulls.
Exhaust has been leak checked and no issues. I will leak check the intake side this week.
One thing I noted is that the BOV is completely open at idle and moving A LOT of air. I never ran the normal vortech bypass valve so I am not sure how the maxflow compares with it. Can this be contributing to the high fuel trims?