Quote:
Originally Posted by steve99
Do you hear loud rattle inside car? it does sound a bit like overpipe or something hitting on chassis at initial startup.
you can quieten/tame down the start in the tune
Set Post timing ignition from -15 to about -6, see picture below
You will need to disable CEL code P050B (post timing ignition timing performance) else on USA roms you will throw a CEL
Set MAF correction after start in gear and neutral tables as per picture below
Set any numbers in idle control tables set any values over 1400 to 1400 ie if its 1800 set to 1400
Then startup will be quiet.
 |
Yeap you are right on the mark!
I am thinking about getting an E-Tune from Open Flash since addition of OP+FP+CB can gain some power and need of e85 tune for BPB support as well. So what are your thoughts on that? Yet should I mention Open Flash about those numbers for start up as well?