Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Back Up Camera

Heist · 11-22-2015, 03:56 PM

More information on pin types on svxdc's site:

http://ae64.com/Pin_insertion_extraction.htm

Verify that you have the Type 'A' harness. That is the same one I had from the factory.

I just installed a backup camera kit. It didn't come with the correct pin (Aftermarket Type 'B'). So, a similar issue.

The one that you want for the OEM harness is available on AutoHarnessHouse. They have crimped connectors for the OEM harness. You just need to splice the wire back down to the reverse wire behind the kick panel.

http://www.autoharnesshouse.com/23416.html

Make sure you pick the OEM style one for Type A and Aftermarket Style for Type B. It seemed to work for me. Oh, and make sure you lift that latch before sticking the pin in. It won't fit in otherwise.

11-22-2015, 03:56 PM	#6
Heist Member Join Date: Jul 2013 Drives: 10 Series Location: San Diego Posts: 18 Thanks: 6 Thanked 12 Times in 6 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	More information on pin types on svxdc's site: http://ae64.com/Pin_insertion_extraction.htm Verify that you have the Type 'A' harness. That is the same one I had from the factory. I just installed a backup camera kit. It didn't come with the correct pin (Aftermarket Type 'B'). So, a similar issue. The one that you want for the OEM harness is available on AutoHarnessHouse. They have crimped connectors for the OEM harness. You just need to splice the wire back down to the reverse wire behind the kick panel. http://www.autoharnesshouse.com/23416.html Make sure you pick the OEM style one for Type A and Aftermarket Style for Type B. It seemed to work for me. Oh, and make sure you lift that latch before sticking the pin in. It won't fit in otherwise.