Quote:
Originally Posted by P3tras
Umm, that is crimp connector. Wire should be crimped, not simply pushed in. Photo is showing it inserted correctly, it just needs to be crimped using special pliers (of course you can use bit of solder and normal pliers). Add a bit of solder, then crimp with normal pliers and then heat it up again, so solder would re-flow.  Just be careful not to overdo it with solder as it might block connector. |
I don't know the name of the things... but I did not explain correctly.
My wire came with a back up camera kit. Do not refer to the image, this is a image i searched for......
I want to connect the wire with that female pin to my pin connector in the car... it does not go in
and now my wire is cut.