Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - STI GEAR SHIFT LEVER (ST35010AS000) unpacking

Trap63 · 11-17-2015, 05:17 PM

Hi guys, here there are some pics about STI shift lever as JDM name it, shortly SS for all us.

After one year of Kartboy usage I decide to remove it and install this one.
With Kartboy I had a lot of trouble referring to "rattle" and sometimes it was very very precise as of engagement (too much).

STI is more "technical" as build, more teflon as you can see. No rattle @at any rpm range and gear.

Reducement of engagement (STI) is a bit lower than Kartboy. Very satisfied.

If you wish to buy, remember that TRD SS is the same HW of STI one and Subaru is a bit cheaper!

11-17-2015, 05:17 PM	#1
Trap63 Senior Member Join Date: Apr 2013 Drives: Brz WRB - Europe LHD Location: TURIN - Piedmont - ITALY Posts: 922 Thanks: 1,177 Thanked 839 Times in 289 Posts Mentioned: 40 Post(s) Tagged: 1 Thread(s)	STI GEAR SHIFT LEVER (ST35010AS000) unpacking Hi guys, here there are some pics about STI shift lever as JDM name it, shortly SS for all us. After one year of Kartboy usage I decide to remove it and install this one. With Kartboy I had a lot of trouble referring to "rattle" and sometimes it was very very precise as of engagement (too much). STI is more "technical" as build, more teflon as you can see. No rattle @at any rpm range and gear. Reducement of engagement (STI) is a bit lower than Kartboy. Very satisfied. If you wish to buy, remember that TRD SS is the same HW of STI one and Subaru is a bit cheaper! __________________