Quote:
Originally Posted by 1Cor10:23
@ NotEric6 @ FT-86 SpeedFactory hey guys, I ordered the diffuser through your partner up here in Canada and had a bent strake (+chip on that strake) and a big dent by the leading edge near the diff cutout. After reading the thread here, it occurred to me that I received the V1 packaging as opposed to V2 despite ordering just a couple weeks ago.
I was able to use some simple tools (i.e. hammer + wooden block haha) to get it back into decent shape (but far from perfect) but I'm fairly irked that this happened to something brand new. |
I'm sorry to hear about your shipping issue. You are going to want to e-mail FT-86 SpeedFactory directly as forum notifications can get lost quite easily. They have made it right in the past, and I have no doubt that they will continue to do so in the future as shipping these large units inevitably will result in some issues along the way. I'm sure they would appreciate it if you send some photos to show them how they can improve packaging in those areas.
I appreciate your patience in this matter and apologize for the "irk" feeling.