Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - FT-86 SpeedFactory Diffuser by Verus

1Cor10:23 · 11-17-2015, 11:18 AM

@NotEric6 @FT-86 SpeedFactory hey guys, I ordered the diffuser through your partner up here in Canada and had a bent strake (+chip on that strake) and a big dent by the leading edge near the diff cutout. After reading the thread here, it occurred to me that I received the V1 packaging as opposed to V2 despite ordering just a couple weeks ago.

I was able to use some simple tools (i.e. hammer + wooden block haha) to get it back into decent shape (but far from perfect) but I'm fairly irked that this happened to something brand new.

11-17-2015, 11:18 AM	#407
1Cor10:23 Senior Member Join Date: Jul 2013 Drives: '13 Whiteout FR-S (M/T) Location: GTA Posts: 1,205 Thanks: 492 Thanked 392 Times in 238 Posts Mentioned: 14 Post(s) Tagged: 1 Thread(s)	@NotEric6 @FT-86 SpeedFactory hey guys, I ordered the diffuser through your partner up here in Canada and had a bent strake (+chip on that strake) and a big dent by the leading edge near the diff cutout. After reading the thread here, it occurred to me that I received the V1 packaging as opposed to V2 despite ordering just a couple weeks ago. I was able to use some simple tools (i.e. hammer + wooden block haha) to get it back into decent shape (but far from perfect) but I'm fairly irked that this happened to something brand new. __________________ \|1Cor10:23 \| Whiteout FR-S \| Form Follows Function Build\|