Quote:
Originally Posted by xFury
Hey everyone, doing some shopping to replace those halogen with LED on the FRS.
Now I search a few threads and see that there's either the 7440 or the 7443 but couldn't find the answer for the correct bulb for the FRS. User manual just gives me the Halogen bulb.
Looking to replace:
Front and Rear Turn signal
and DLR.
What bulb size should I use to make sure its the appropriate one for the front turns, rear turns and DLR.
Also, do I need the load resistors for the front turns and DLR? Or can I just add those hyperfix relay instead?
Thanks!
|
DRLs are 9005. DRLs do not need resistors.
LED signals will need resistors or you can just get a flasher module.
http://www.modbargains.com/diode-dyn...hyperflash.htm
7440 and 7443 are the same sized bulb.
7443 is a switchback, which means it is dual colored (white/amber).
if you want the lights to remain the same color as stock, get 7440 for front/rear signals.
7443 for the front if you want the signals to be white as you drive, then flash amber when you signal
