View Single Post
Old 11-09-2015, 11:11 PM   #152
Racecomp Engineering
 
Join Date: Nov 2011
Drives: 2016 BRZ, 2012 Paris Di2 & 2018 STI
Location: Severn, MD
Posts: 5,520
Thanks: 3,542
Thanked 7,415 Times in 3,033 Posts
Mentioned: 311 Post(s)
Tagged: 9 Thread(s)
Send a message via AIM to Racecomp Engineering
Quote:
Originally Posted by tofumania View Post
I have koni yellow full strut replacement, and eibach sportline. i have the whiteline crash bolts in the front at -1 degree, and whiteline rear control arms, at 0 degrees. i was thinking of getting the car realigned with -2 in the front and -1 in the rear. Is this a good setup? the car is alittle lower the the 20-30 mm mark and is more like 34 mm. is this bad? should i get a front swaybar? the car to my knowledge still handles good, the rear looses grip a little more abruptly the stock.
0 camber in the rear is not good...even -1 is not enough IMO.

-2 front -1.5 rear should be fine for you. 0 toe front and a tiny bit of rear toe in.

IMO those springs are lower than ideal for handling and ride quality but fix the alignment first and see what you think.

- Andrew
Racecomp Engineering is offline   Reply With Quote
The Following 2 Users Say Thank You to Racecomp Engineering For This Useful Post:
BAOVAN (12-22-2016), sam69 (02-07-2016)