Quote:
Originally Posted by Euphues
So I installed hotchkis lowering springs last weekend. This weekend I went into Firestone and bought a lifetime alignment. The car has pretty even camber in the front at -.4" and -.3" I plan to bring it back and have camber bolts installed. I got some SPC ones online.
The rear however is -2.4 left and -1.4 right.
What would cause this to happen? Any advice on a solution for the situation?
|
You can attempt to center the subframe using rigid collars, or shifting the subframe after loosening then retightening, but not much you can do besides using adjustable control arms. I've tried using the first 2 methods I mentioned to no avail. If you measure your ride heights, it too will be lop sided. I thought this would be less severe on newer models... apparently not. Yours sound to be really severe. My car is about .5 degrees off and sits about 5~8mm taller on the passenger side.