View Single Post
Old 10-27-2015, 02:11 PM   #3102
CSG Mike
 
CSG Mike's Avatar
 
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,564
Thanks: 8,942
Thanked 14,214 Times in 6,856 Posts
Mentioned: 970 Post(s)
Quote:
Originally Posted by strat61caster View Post
Apologies if you mentioned it before but where's your alignment at? It blows my mind how much grip Toyobaru left on the table with how crappy their alignment is and how you have to spend a few hundred bucks if not a thousand+ to unlock it.

I finally unlocked full on oversteer a few weeks back by going up to over -3 degrees of camber up front, the rear was at -1 and -1.4. Endless grip up front, none in the rear in comparison, couldn't get the power down, backed off on the camber up front between runs and the balance came back. I know I'll get more grip with more camber in the rear which means I can use more camber up front.

My car came with -0.3 degrees up front from the factory
Because 99% of the owners will never actually drive the car hard, and only a small (single digit) percentage will ever even attempt to experience the cornering ability.
CSG Mike is online now   Reply With Quote