Quote:
Originally Posted by RustySocket
see post 77 above. This is the oem camera i installed on my 2015. On the wire in the trunk going to the camera are a pair of jumper wires which are used to turn the guidelines on and off and invert the image. They may be under a piece of heatshrink on the wire. My installation instructions were for a camry and this camera is used in many toyota products. Id be suprised if there not there somewhere. They are on the camera end of the harness in the trunk. Not in the dash.
|
Sweet, I'll check it on the car later, Was surprised the Lines weren't a standard option in the backup camera in the 2016 model.
Thanks!