Quote:
Originally Posted by RustySocket
Thats awesome. Ive already done the rear camera. The rear i purchased was the oem fit camera and id rather not order another one of those due to the cost.
Which camera did you use for the front. The reason i ask is i see that on your front view you have the lines disabled and i know each camera has different ways of doing that. I love the button mod, very stealthy.
Im going to get that switch box ordered, thats just too easy to not do it.
Thanks @ Danklvr
Edit, i notice the link for the switchbox says 60 days to ship, did it really take that long? |
I think i got this cam, but had to open it up, and flip the lens 180 degrees around, so that when installed in my desired orientation, the camera lens would not be pointing up, even though the housing is pointing down, which youll have to do with just about any front/reverse cam.. its easy, mark lens on front with strip of colored tape down center, so 50/50 tape and lense are showinf, open back, cut around rubber sealant carefully with x-acto, remove lens, flip 180, and using your tape as a guide, fit back into position. seal with hot glue and silicone, enjoy your pimpness..
http://www.ebay.com/itm/HD-Black-CCD...9DcZMH1zOqaPJw
shipping time and transit on the cam switch box was about 25 days all in all, not too bad for a qty of 1ea.