Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Wil · 10-22-2015, 08:24 PM

Hello everyone,
I can't really figure out what the problem is so I'm asking all you GT86 experts!
Because, yes, first things first, the model I'm talking about is a GT86.

I bought a bunch of LED for both the front, tail and side turn signals.
With the stock flasher, as expected, they hyperblink.
What I didn't know is that they only hyperblink when you activate the left or right turn signals, when all turn signals are on (when pushing on the red triangle on the dash), the blinking rate is normal.

So, to solve the problem, I bought another flasher :
http://www.ebay.com/itm/CARCHET-8-Pi...9VrhGn&vxp=mtr

Now, when all turn signals are activated (with the red triangle) I get a slight delay (longer first flash) which I believe I can live with.

But nothing when I turn the turn signals command. No click, no light, nothing.
I only tested with the rear LED installed. Could it only work with LED in all spots?

Thank you in advance for all your inputs and for kindly excusing my approximate english (I hope you didn't laugh too much when I started talking about "the red triangle", haha)

Have a nice day,
RW

10-22-2015, 08:24 PM	#1
Wil Senior Member Join Date: Jun 2015 Drives: Drives like a crab. Location: Belgium Posts: 101 Thanks: 2 Thanked 42 Times in 14 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	LED Flasher problem Hello everyone, I can't really figure out what the problem is so I'm asking all you GT86 experts! Because, yes, first things first, the model I'm talking about is a GT86. I bought a bunch of LED for both the front, tail and side turn signals. With the stock flasher, as expected, they hyperblink. What I didn't know is that they only hyperblink when you activate the left or right turn signals, when all turn signals are on (when pushing on the red triangle on the dash), the blinking rate is normal. So, to solve the problem, I bought another flasher : http://www.ebay.com/itm/CARCHET-8-Pi...9VrhGn&vxp=mtr Now, when all turn signals are activated (with the red triangle) I get a slight delay (longer first flash) which I believe I can live with. But nothing when I turn the turn signals command. No click, no light, nothing. I only tested with the rear LED installed. Could it only work with LED in all spots? Thank you in advance for all your inputs and for kindly excusing my approximate english (I hope you didn't laugh too much when I started talking about "the red triangle", haha) Have a nice day, RW