Quote:
Originally Posted by joop1987
I installed one of these last weekend and so far I like it a lot. Shipping was fast and install was pretty simple. I had to grind the nipples off the original brackets and move the amp wire from pin 8 to 9. If you have a BRZ, you need to connect both pins. The unit comes with the Toyota harness for power, speakers, .... But you will need the antenna adapter cable (Metra 40-LX11) and USB adapter cable(Metra AX-TOYUSB).
|
Hi joop1987,
Could you go into a little more detail about needing both pins for the BRZ?
Does that mean you're swapping pin position 8 and 9 with their corresponding wires or soldering both 8 and 9 wires to pin position 9?
Thanks