Quote:
Originally Posted by keen as
Thanks for your suggestions and offer of help.
At this stage I am not going to ask Wayno because I want to try a local person that has experience with FI and OFT.
my ROM etc http://www.ft86club.com/forums/showp...&postcount=395
I think if you make me a tune file, it will also have problems due to some tables in the Aussie ROMs not defined.
Also my symptoms match the thermal motor control protection and I get ZERO boost for a few seconds until it resets.
This is different to Thermal battery de-rate (controller protection). "Boost can be use but is slightly reduced. *Resets 5-20mins depending on engine bay temps."
|
@
Wayno has a definition file for your ROM, so your Australian tables will be defined. The trick is to copy the changes from an American ESC tune. I think that by comparing the OFT OTS stage 2 B01C tune to the OFT ESC stage 2 B01C tune, record which tables are changed, then change the same tables manually, cell-by-cell in your A01G ROM defined by @
Wayno's definition file. RR shows "No missing tables" between OFT's ESC tune and OFT's OTS tune, so I should be able to make you a 98 Octane tune, but not an E85 tune. Do you want me to give it a try?