10-13-2015, 03:52 PM
|
#3021
|
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,564
Thanks: 8,942
Thanked 14,214 Times in 6,856 Posts
Mentioned: 970 Post(s)
|
Quote:
Originally Posted by Shark_Bait88
Did my first track day two weekends ago at Road America. Had a blast, and noticed something interesting.
The car seems to reach the threshold of grip in right turns much faster than in left turns. There were two spots on the track where it was most noticeable.
1. Going through the Carousel (long right sweeper) the rear end would start to get floaty from mid-corner to exit if my speed was too high or I started to apply throttle. Could really only start to get into the throttle once I was pretty much out of the corner completely. (Not saying I'm complaining about not being able to mash the throttle. I couldn't start to apply steady throttle through corner exit)
2. I couldn't go through the Kink any faster than about 85mph. Anytime I entered at 90+ it would get squirrely on the exit, and I wasn't lifting or giving jerky steering inputs. That was with applying even throttle through the turn and getting back on it at the exit. I'm on a fairly used, but still good, set of last year's Rivals; and by comparison my buddy was able to take the same turn at 100mph on stock tires in his BRZ. (Of course you could argue that he's just a better driver than me, which is likely true, but doesn't seem to be the source of this probelm)
Essentially, in right hand turns steady-application (not overuse) of throttle is causing the car to loose grip rather than gain it. This is with smooth steering and pedal inputs as well. All the instructors who rode with me noticed that the car wasn't behaving like it should, and recommended I have the rear end looked at.
After discussing it with one instructor, we figured that it could be that the stock sway bar is pre-loaded one way or it could be a bushing problem.
Car has stock suspension apart from OEM crash bolts, and the only other upgrades are a Berk single-exit delete and Kosei K1s w/ the previously mentioned Rivals. Alignment was set to about -1/-1.5 camber F/R with 0 toe in the front and 1/32 toe-in in the rear. I was only running the car in VSC Sport Mode, since it was my first time at an actual track day.
Haven't taken it anywhere to be looked at yet, but was curious to hear thoughts from you all.
|
Is the track surface directly comparable? Is there any degree of banking, even if its tiny like 1 degree?
|
|
|