|
Trust86
Diode dynamics are really great, my LEDs are from them. Other people run these without issue. They don't have an extra ground like yours, so I tried mounting the ballasts to the chassis as I'm not trying to open these up and do some custom wiring. It didn't change anything, I didn't expect it to. But it was worth a shot.
I definitely appreciate your suggestion!
The ballast was ruled out as this only happens on the left side with all the ballasts Innovited has sent me, with and without using the relay harness
Is your Diode Dynamics kit AC or DC? Are you running a relay harness? And are you using a resistor?
|