[Calum]

Originally Posted by Cole

Ok, so the situation:

I'm currently on coils, but ideally would like to return to my stock suspension for the winter. I switched over the front pieces no problem, then got the rear disassembled without issue.

The trouble is, once I get onto the re assembly of the rear, I can't get the lca to bolt up. I can either attach it to the hub or the part by the diff, but not both. Is this due to my toe arms? Is there anyone who had been through the same process and has any tricks to getting this accomplished?

Disconnect the sway bar from the other side so it can pivot up and out of the way. I'm guessing that's your problem. Barring that, post pictures of what's going on.